Adafruit 0.8" 8x8 LED-Matrix mit I2C-Backpack, gelb, runde Pixel - 1
Adafruit 0.8" 8x8 LED-Matrix mit I2C-Backpack, gelb, runde Pixel - 1 Adafruit 0.8" 8x8 LED-Matrix mit I2C-Backpack, gelb, runde Pixel - 2 Adafruit 0.8" 8x8 LED-Matrix mit I2C-Backpack, gelb, runde Pixel - 3

11% Sparen
9,70 €
Ursprünglicher Preis:  10,90 €
Sie sparen:  1,20 €

Auf Lager, versandfertig am nächsten Werktag

In den Warenkorb
Alle Preise exkl. gesetzlicher Mehrwertsteuer. Dieses Angebot ist gültig bis einschließlich 31.12.2018. Nur solange der Vorrat reicht.

Artikel-Nr. 145748
Hersteller ADAFRUIT
Hersteller-Nr 871
EAN 748347527216
Im Lieferumfang finden Sie folgende Artikel:
1x Adafruit 0.8" 8x8 LED-Matrix, gelb, runde Pixel
1x Adafruit I2C-Backpack
1x Stiftleiste, 4 Pins

Hinweis: Zur Inbetriebnahme sind Lötarbeiten erforderlich!

Beschreibung von Adafruit (englisch):
What's better than a single LED? Lots of LEDs! A fun way to make a small display is to use an 8x8 matrix or a 4-digit 7-segment display. Matrices like these are 'multiplexed' - so to control 64 LEDs you need 16 pins. That's a lot of pins, and there are driver chips like the MAX7219 that can control a matrix for you but there's a lot of wiring to set up and they take up a ton of space. Here at Adafruit we feel your pain! After all, wouldn't it be awesome if you could control a matrix without tons of wiring? That's where these adorable LED matrix backpacks come in. We have them in two flavors - a mini 8x8 and a 4-digit 0.56" 7-segment. They work perfectly with the matrices we stock in the Adafruit shop and make adding a bright little display trivial.

The matrices use a driver chip that does all the heavy lifting for you: They have a built in clock so they multiplex the display. They use constant-current drivers for ultra-bright, consistent color (the images above are photographed at the dimmest setting to avoid overloading our camera!), 1/16 step display dimming, all via a simple I2C interface. The backpacks come with address-selection jumpers so you can connect up to four mini 8x8's or eight 7-segments (or a combination, such as four mini 8x8's and four 7-segments, etc) on a single I2C bus.

The product kit comes with:
  • A fully tested and assembled LED backpack
  • Ultra-bright 8x8 pure yellow matrix
  • 4-pin header
A bit of soldering is required to attach the matrix onto the backpack but its very easy to do and only takes about 5 minutes.

Of course, in classic Adafruit fashion, we also have a detailed tutorial showing you how to solder, wire and control the display. We even wrote a very nice library for the backpacks so you can get running in under half an hour, displaying images on the matrix or numbers on the 7-segment. If you've been eyeing matrix displays but hesitated because of the complexity, this is the solution you've been looking for!